Multiturn-ROTARNOCK (English)

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen
Multiturn-ROTARNOCK

Device replacement

There is no direct replacement for Multiturn-ROTARNOCK. As an alternative a LOCON 100 cam control can be used, in addition to a corresponding SSI-Multiturn-Encoder. In order to ensure a proper and fast replacement and programming of the new device, we need the following information and components:

  1. We have to know the serial-no. and art.-no. (Vxxxx) of the old device in order to establish an offer for a corresponding new device.
  2. If a TERM 6 or TERM 24 is already in use, then we have to know the serial-no. of this used devices in order to check the compatibilty to a new device.
  3. For the configuration and programming of the new device with WINLOC 32-Basic-or-comfort Version, a corresponding programming cable is needed. Note: Whether this programming cable can also be used for reading out the old device if applicable, must be checked in each case.
  4. For the configuration of the new device a TERM 6 or WINLOC 32-Basic-or-comfort Version is needed.
  5. For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC needs a real COM-Port. If there is no real COM-Port at the PC, then a USB-to-RS232 converter has to be used.

For a corresponding offer please let us know the serial no. and art.-no. (Vxxxx) of the old device and, if applicable, the serial-no. of the already used TERM 6 resp. TERM 24.

Weblinks

Manual for Multiturn-ROTARNOCK (PDF-file)