Benutzer:Biegel/Protocol Developer
< Benutzer:Biegel
Zur Navigation springen
Zur Suche springen
Version vom 7. April 2016, 15:53 Uhr von Litzinger (Diskussion | Beiträge)
Mit dem Protocol Developer können Scripte erstellt und über die Debug-Funktion getestet werden. Es ist darauf zu achten, dass immer mit der aktuellen Version gearbeitet wird. Diese steht im Downloadbereich der Homepage www.deutschmann.de zur Verfügung.
Kommunikation über die Debug-Schnittstelle
Für die folgenden UNIGATEs ist die Kommunikation mit dem Protocol Developer nur über die Debug-Schnittstelle möglich. Hinweis: Für das jeweilige UNIGATE sollte eine dementsprechende stabile Spannungsversorgung verwendet werden.
UNIGATE CL | PC COM-Port (9 pol. D-Sub) | ||||
---|---|---|---|---|---|
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X2 | 3 | Rx-Debug | COM-Port | 3 | Tx |
X2 | 4 | Tx-Debug | COM-Port | 2 | Rx |
X1 | 3 | Appl.-GND | COM-Port | 5 | GND |
X2 | 1 | UB | - | - | - |
X2 | 2 | 0V | - | - | - |
Achtung: Nicht in Verbindung mit Option I/O8 | |||||
UNIGATE CL (Option GT) | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X2 | 3 | Rx-Debug | COM-Port | 3 | Tx |
X2 | 4 | Tx-Debug | COM-Port | 2 | Rx |
X1 | 3 | Appl.-GND | COM-Port | 5 | GND |
X2 | 1 | UB | - | - | - |
X2 | 2 | 0V | - | - | - |
Achtung: Nicht in Verbindung mit Option I/O8 | |||||
UNIGATE CX (1. Gerät) | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X1 | 3 | Rx-Debug | COM-Port | 3 | Tx |
X1 | 4 | Tx-Debug | COM-Port | 2 | Rx |
X1 | 2 | 0V | COM-Port | 5 | GND |
X2 | 1 | UB (Out) | - | - | - |
X2 | 2 | 0V (Out) | - | - | - |
Hinweis: Beim Debuggen des 1. Gerätes, kann die Spannungsversorgung am Stecker X2 Pins 1 und 2 angeschlossen werden! | |||||
UNIGATE CX (2. Gerät) | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X2 | 3 | Rx-Debug | COM-Port | 3 | Tx |
X2 | 4 | Tx-Debug | COM-Port | 2 | Rx |
X2 | 2 | 0V | COM-Port | 5 | GND |
X1 | 1 | UB (Pwr) | - | - | - |
X1 | 2 | 0V (Pwr) | - | - | - |
Hinweis: Beim Debuggen des 2. Gerätes, kann die Spannungsversorgung am Stecker X1 Pins 1 und 2 angeschlossen werden! | |||||
UNIGATE FC | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
- | 16 | DbgRx | COM-Port | 3 | Tx |
- | 15 | DbgTx | COM-Port | 2 | Rx |
- | 12 | GND | COM-Port | 5 | GND |
- | 1 | Vcc | - | - | - |
- | 20 | GND | - | - | - |
UNIGATE IC | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
- | 28 | DbgRx | COM-Port | 3 | Tx |
- | 27 | DbgTx | COM-Port | 2 | Rx |
- | 24 | GND | COM-Port | 5 | GND |
- | 1 | Vcc | - | - | - |
- | 32 | GND | - | - | - |
UNIGATE SC | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
(9 pol. D-Sub) | 9 | RxD | COM-Port | 3 | Tx |
(9 pol. D-Sub) | 4 | TxD | COM-Port | 2 | Rx |
(9 pol. D-Sub) | 5 | GND | COM-Port | 5 | GND |
2pol. Schrab-Steckverbinder | 1 | UB | - | - | - |
2pol. Schrab-Steckverbinder | 2 | 0V | - | - | - |
Achtung: Nur bei Option Debug. |
Kommunikation über die Applikationsschnittstelle
Für die folgenden UNIGATEs ist die Kommunikation mit dem Protocol Developer nur über die Applikationsschnittstelle möglich. Hinweis: Für das jeweilige UNIGATE sollte eine dementsprechende stabile Spannungsversorgung verwendet werden.
UNIGATE CM Applikationsschnittstelle | PC COM-Port (9 pol. D-Sub) | ||||
---|---|---|---|---|---|
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X1 | 1 | Rx | COM-Port | 3 | Tx |
X1 | 2 | Tx | COM-Port | 2 | Rx |
X1 | 3 | Appl.-GND | COM-Port | 5 | GND |
X2 | 1 | UB | - | - | - |
X2 | 2 | 0V | - | - | - |
Hinweis: Weitere Informationen zum Debuggen über die Applikationsscnittstelle sind dem Handbuch zu entnehmen | |||||
UNIGATE EL Applikationsschnittstelle | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X1 | 1 | Rx | COM-Port | 3 | Tx |
X1 | 2 | Tx | COM-Port | 2 | Rx |
X1 | 3 | Appl.-GND | COM-Port | 5 | GND |
X2 | 1 | UB | - | - | - |
X2 | 2 | 0V | - | - | - |
Hinweis: Weitere Informationen zum Debuggen über die Applikationsscnittstelle sind dem Handbuch zu entnehmen | |||||
UNIGATE CL Applikationsschnittstelle | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X1 | 1 | Rx | COM-Port | 3 | Tx |
X1 | 2 | Tx | COM-Port | 2 | Rx |
X1 | 3 | Appl.-GND | COM-Port | 5 | GND |
X2 | 1 | UB | - | - | - |
X2 | 2 | 0V | - | - | - |
Achtung: Nur in Verbindung mit Option I/O8 Hinweis: Weitere Informationen zum Debuggen über die Applikationsschnittstelle sind dem Handbuch zu entnehmen! | |||||
UNIGATE CL (Option GT) Applikationsschnittstelle | PC COM-Port (9 pol. D-Sub) | ||||
Stecker | Pin | Belegung | Stecker | Pin | Belegung |
X1 | 1 | Rx | COM-Port | 3 | Tx |
X1 | 2 | Tx | COM-Port | 2 | Rx |
X1 | 3 | Appl.-GND | COM-Port | 5 | GND |
X2 | 1 | UB | - | - | - |
X2 | 2 | 0V | - | - | - |
Achtung: Nur in Verbindung mit Option I/O8 Hinweis: Weitere Informationen zum Debuggen über die Applikationsschnittstelle sind dem Handbuch zu entnehmen! |
Weblinks
- Protocol Developer (Zip-Datei)