Data component generator

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen
Data Component Generator 1
Data Component Generator 2

The program makes it possible to generate an AWL source file in a simple manner, which then can be implemented e.g. into a data component generated by a S7®. Due to the neat arrangement the AWL source file can be generated fast and easily.

  • Generating the S7® program code – fast and easy

After the program is started, you can navigate through the setting options by means of the survey on the left side. On the individual Parameter cards you can set the parameter values, such as number of cams to be used as well as the cam type.

  • Generating the component through WINLOC 32® elegantly

If the data component generator is started from the WINLOC 32 -basic or comfort version, then the actual data, created in WINLOC 32® (cams, programs, idle times, etc.) will automatically be assigned to the AWL source file. By means of the corresponding settings in the DB generator‘s window it is also possible to create “reserves” for programs, cams, idle times etc. that are to be recorded later.

system requirements

Windows XP, Windows 7 (32 und 64 Bit)

Data Component Generator 1

For ROTARNOCK 1-PB, ROTARNOCK 2-PB, ROTARNOCK 3-PB und ROTARNOCK 4-PB cam controls must be used Data Component Generator 1 . The download is free of charge.

Data Component Generator 2

For LOCON 100-PB, LOCON 200-PB, ROTARNOCK 80-PB und ROTARNOCK 100-PB cam controls must be used Data Component Generator 2. The download is free of charge.

Weblinks