Data component simulator

Aus Deutschmann Wiki
Version vom 19. Dezember 2017, 10:40 Uhr von Biegel (Diskussion | Beiträge) (→‎System Requirements)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springen Zur Suche springen
Ansicht eines Datenbausteins mit den Daten einer AWL-Quell-Datei im Datenbausteinsimulator

This program enables you to test an AWL source file, which e.g. is generated by a Data component generator, in an easy way. The program includes a PROFIBUS-Master-Simulation. The used serial interface (COM-Port), the PROFIBUS-Slave-ID of the connected cam control as well as the corresponding GSD file have to be entered into the PROFIBUS-Master-Simulation. The data of the AWL file will then be transferred into the cam control via the program. Afterwards all parameters of the data component are visualized. The software download is free of charge.

System Requirements

Windows XP, Windows 7 (32 and 64 Bit), Windows 10 (64 Bit)

Needed Hardware

In order to be able to simulate this program on a cam control with PROFIBUS-connection, there is additional hardware simulating the PROFIBUS-Communication needed.


Software Data component simulator(ZIP-file)