868
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
Device replacement ROTARNOCK - PROFIBUS (English) (Quelltext anzeigen)
Version vom 18. Dezember 2017, 12:00 Uhr
, 12:00, 18. Dez. 2017→Device Configuration
==Device Configuration==
The configuration has to be done with our software [[WINLOC 32 (English)|WINLOC 32]]-Basis-or Comfortversion. Herefore is needed a corresponding [[Programming cable]]. '''Note:''' If this Whether the programming cable should can also be used for a needed necessary read -out of the old device then this has to be checked separately. tested in each case! '''Attention:''' For the configuration, the PC is in need of a real COM-Port. If there is no real COM-Port at the PC, then a [[USB-to-RS232 converter]] has to be used.
*'''Virtual encoder resolution:''' If the cam values of the existing electronic cam control should be reused in the new data block, the virtual encoder resolution must be changed to the value of the existing electronic cam control.
*'''Type of idle time compensation:''' If the idle times of the existing electronic cam control should be reused in the new data block, then the type of idle time (Bitwise; Blockwise; ...) has to be set accordingly.
