868
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
Device replacement ROTARNOCK 1, 2, 3 and 4 (English) (Quelltext anzeigen)
Version vom 18. Dezember 2017, 11:58 Uhr
, 11:58, 18. Dez. 2017keine Bearbeitungszusammenfassung
# The serial number or the article number (Vxxxx) of the old device have to be known to ensure that an appropriate new device can be offered.
# If a TERM 6 oder a TERM 24 is already in use, we also need to know the serial number of this device to check the compatibility with the new device. '''Note''': TERM 5 is '''not''' compatible with ROTARNOCK 100!
# To read-out the old device and possibly for the configuration and programming of the new device with the WINLOC32-Basis-or comfort-version, a corresponding programming [[Programming cable ]] is needed. '''Note''': Whether the programming cable can also be used for a necessary read-out of the old device has to be tested in each case!
# A TERM 6 or the WINLOC32-Basis or comfort-version is needed for the configuration of the new device.
# There has to be a real COM-Port on the PC for the configuration and programming of the new device with WINLOC32. If there is no real COM-Port on the PC, you need a USB-RS232-converter.
