868
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
Device replacement ROTARNOCK 1, 2, 3 and 4 (English) (Quelltext anzeigen)
Version vom 27. August 2019, 14:28 Uhr
, 14:28, 27. Aug. 2019→Programming - zero offset - program selection
# There has to be a real COM-Port on the PC for the configuration and programming of the new device with WINLOC32. If there is no real COM-Port on the PC, you need a USB-RS232-converter.
=== Programming - zero offset - program selection ===
# The programming of the new device can be performed with a TERM 6, a TERM 24 or with the WINLOC32-Basis or comfort-version. With the PROFIBUS version you can also program via PROFIBUS.# The zero offset can be performed with a TERM 6, a TERM 24 or with the WINLOC32-comfort-version. With the PROFIBUS version you can also program via PROFIBUS.# The program selection can be done with a TERM 6, a TERM 24 or via the external program selection. With the PROFIBUS version you can also program via PROFIBUS.
'''For a corresponding offer please let us know the serial number or the article number (Vxxxx) of the old device and, if used, the serial-no. of TERM 6 resp. TERM 24.'''
