ENS (English): Unterschied zwischen den Versionen
Reith (Diskussion | Beiträge) |
Biegel (Diskussion | Beiträge) |
||
(2 dazwischenliegende Versionen von einem anderen Benutzer werden nicht angezeigt) | |||
Zeile 4: | Zeile 4: | ||
ENS can be replaced by a corresponding [[LOCON 17 (English)|LOCON 17]] or by a corresponding [[LOCON 24 (English)|LOCON 24]] or by a corresponding [[LOCON 200 (English)|LOCON 200]] with a corresponding number of extension module [[LOCON 100 (English)#Erweiterungsmodul|LOCON 100-Out I/O32]].It is highly recommended to also replace the used encoder. The choice of the replacement is depending on the number of needed outputs. | ENS can be replaced by a corresponding [[LOCON 17 (English)|LOCON 17]] or by a corresponding [[LOCON 24 (English)|LOCON 24]] or by a corresponding [[LOCON 200 (English)|LOCON 200]] with a corresponding number of extension module [[LOCON 100 (English)#Erweiterungsmodul|LOCON 100-Out I/O32]].It is highly recommended to also replace the used encoder. The choice of the replacement is depending on the number of needed outputs. | ||
In order to ensure a proper and fast replacement and programming of the new device, we need the following information and components: | In order to ensure a proper and fast replacement and programming of the new device, we need the following information and components: | ||
− | #All the data listed on the type label has to be known in order to be able to offer a corresponding new device. For the use of a new cam control '''without''' control panel ([[LOCON 17| LOCON 17-PM]] oder [[LOCON 24| LOCON 24-PM]] or [[LOCON 200 (English)|LOCON 200]], a [[TERM 6 (English)|TERM 6]] or [[TERM 24 (English)|TERM 24]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort-Version is needed for operation. | + | #All the data listed on the type label has to be known in order to be able to offer a corresponding new device. For the use of a new cam control '''without''' control panel ([[LOCON 17 (English)| LOCON 17-PM]] oder [[LOCON 24 (English)| LOCON 24-PM]] or [[LOCON 200 (English)|LOCON 200]], a [[TERM 6 (English)|TERM 6]] or [[TERM 24 (English)|TERM 24]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort-Version is needed for operation. |
#If a new configuration is required, then the unit has to replaced by [[TERM 6 (English)|TERM 6]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort Version. | #If a new configuration is required, then the unit has to replaced by [[TERM 6 (English)|TERM 6]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort Version. | ||
− | # | + | #For the configuration and programming of the new device with WINLOC32-Basic-or-comfort Version a corresponding [[Programming cable]] is needed. |
− | # | + | #For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC needs a real COM-Port. If there is no real COM-Port at the PC,then a [[USB-to-RS232 converter]] has to be used. |
− | ''' | + | '''For a corresponding offer please let us know all the data listed on the type label.''' |
+ | == Replacement by LOCON 200 == | ||
+ | '''Note:''' If "External Programm Selection" as well as "Programm Start", "Programm Enable" and "Run Control" is used, then would be needed at LOCON 200 up to 9 I/Os. If an absolute parallel encoder is configured, then there will be not enough I/O's at the LOCON 200 in order to realise all the before mentioned functions! If these functions are needed, then please replace the absolute parallel encoder by a SSI-Encoder! |
Aktuelle Version vom 2. Juni 2020, 07:35 Uhr
ENS belongs to the first series of electronic cam control built by Deutschmann Automation. These devices are no longer supported, a repair is not possible anymore.
Device Replacement
ENS can be replaced by a corresponding LOCON 17 or by a corresponding LOCON 24 or by a corresponding LOCON 200 with a corresponding number of extension module LOCON 100-Out I/O32.It is highly recommended to also replace the used encoder. The choice of the replacement is depending on the number of needed outputs. In order to ensure a proper and fast replacement and programming of the new device, we need the following information and components:
- All the data listed on the type label has to be known in order to be able to offer a corresponding new device. For the use of a new cam control without control panel ( LOCON 17-PM oder LOCON 24-PM or LOCON 200, a TERM 6 or TERM 24 or WINLOC 32-Basic-or-Comfort-Version is needed for operation.
- If a new configuration is required, then the unit has to replaced by TERM 6 or WINLOC 32-Basic-or-Comfort Version.
- For the configuration and programming of the new device with WINLOC32-Basic-or-comfort Version a corresponding Programming cable is needed.
- For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC needs a real COM-Port. If there is no real COM-Port at the PC,then a USB-to-RS232 converter has to be used.
For a corresponding offer please let us know all the data listed on the type label.
Replacement by LOCON 200
Note: If "External Programm Selection" as well as "Programm Start", "Programm Enable" and "Run Control" is used, then would be needed at LOCON 200 up to 9 I/Os. If an absolute parallel encoder is configured, then there will be not enough I/O's at the LOCON 200 in order to realise all the before mentioned functions! If these functions are needed, then please replace the absolute parallel encoder by a SSI-Encoder!