ENS (English): Unterschied zwischen den Versionen

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen
Zeile 4: Zeile 4:
 
ENS can be replaced by a corresponding [[LOCON 17 (English)|LOCON 17]] or by a corresponding [[LOCON 24 (English)|LOCON 24]] or by a corresponding [[LOCON 200 (English)|LOCON 200]] with a corresponding number of extension module [[LOCON 100 (English)#Erweiterungsmodul|LOCON 100-Out I/O32]].It is highly recommended to also replace the used encoder. The choice of the replacement is depending on the number of needed outputs.
 
ENS can be replaced by a corresponding [[LOCON 17 (English)|LOCON 17]] or by a corresponding [[LOCON 24 (English)|LOCON 24]] or by a corresponding [[LOCON 200 (English)|LOCON 200]] with a corresponding number of extension module [[LOCON 100 (English)#Erweiterungsmodul|LOCON 100-Out I/O32]].It is highly recommended to also replace the used encoder. The choice of the replacement is depending on the number of needed outputs.
 
In order to ensure a proper and fast replacement and programming of the new device, we need the following information and components:  
 
In order to ensure a proper and fast replacement and programming of the new device, we need the following information and components:  
#All the data listed on the type label has to be known in order to be able to offer a corresponding new device. For the use of a new cam control '''without''' control panel ([[LOCON 17| LOCON 17-PM]] oder [[LOCON 24| LOCON 24-PM]] or [[LOCON 200 (English)|LOCON 200]], a [[TERM 6 (English)|TERM 6]] or [[TERM 24 (English)|TERM 24]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort-Version is needed for operation.
+
#All the data listed on the type label has to be known in order to be able to offer a corresponding new device. For the use of a new cam control '''without''' control panel ([[LOCON 17 (English)| LOCON 17-PM]] oder [[LOCON 24 (English)| LOCON 24-PM]] or [[LOCON 200 (English)|LOCON 200]], a [[TERM 6 (English)|TERM 6]] or [[TERM 24 (English)|TERM 24]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort-Version is needed for operation.
 
#If a new configuration is required, then the unit has to replaced by [[TERM 6 (English)|TERM 6]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort Version.
 
#If a new configuration is required, then the unit has to replaced by [[TERM 6 (English)|TERM 6]] or [[WINLOC 32 (English)|WINLOC 32]]-Basic-or-Comfort Version.
 
#For the configuration and programming of the new device with WINLOC32-Basic-or-comfort Version a corresponding [[Programming cable]] is needed.
 
#For the configuration and programming of the new device with WINLOC32-Basic-or-comfort Version a corresponding [[Programming cable]] is needed.
 
#For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC needs a real COM-Port. If there is no real COM-Port at the PC,then a [[USB-to-RS232 converter]] has to be used.
 
#For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC needs a real COM-Port. If there is no real COM-Port at the PC,then a [[USB-to-RS232 converter]] has to be used.
 
'''For a corresponding offer please let us know all the data listed on the type label.'''
 
'''For a corresponding offer please let us know all the data listed on the type label.'''

Version vom 12. April 2017, 10:56 Uhr

ENS

ENS belongs to the first series of electronic cam control built by Deutschmann Automation. These devices are no longer supported, a repair is not possible anymore.

Device Replacement

ENS can be replaced by a corresponding LOCON 17 or by a corresponding LOCON 24 or by a corresponding LOCON 200 with a corresponding number of extension module LOCON 100-Out I/O32.It is highly recommended to also replace the used encoder. The choice of the replacement is depending on the number of needed outputs. In order to ensure a proper and fast replacement and programming of the new device, we need the following information and components:

  1. All the data listed on the type label has to be known in order to be able to offer a corresponding new device. For the use of a new cam control without control panel ( LOCON 17-PM oder LOCON 24-PM or LOCON 200, a TERM 6 or TERM 24 or WINLOC 32-Basic-or-Comfort-Version is needed for operation.
  2. If a new configuration is required, then the unit has to replaced by TERM 6 or WINLOC 32-Basic-or-Comfort Version.
  3. For the configuration and programming of the new device with WINLOC32-Basic-or-comfort Version a corresponding Programming cable is needed.
  4. For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC needs a real COM-Port. If there is no real COM-Port at the PC,then a USB-to-RS232 converter has to be used.

For a corresponding offer please let us know all the data listed on the type label.