Firmware update: Unterschied zwischen den Versionen

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen
(12 dazwischenliegende Versionen von 3 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
In order to load a firmware into your UNIGATE device please use the software [[#Weblinks|Firmware Download Tool]].
+
[[Datei:FDT.JPG|thumb|Firmware Download Tool (FDT)]]
You can find it in our web site's [[#Weblinks|support area]].
+
The Firmware Download Tool (FDT) software lets you load or update the firmware of a Deutschmann UNIGATE® device. Please pay attention that you have to use the latest version of ''[[#Weblinks|Firmware Download Tool]]'' (FDT). The download of a firmware is described in detail in this ''[[#Weblinks|Manual]]''. The actual ''[[#Weblinks|Firmware]]'' for the used UNIGATE® can be requested by a form on our website. The Firmware Download Tool (FDT) and the manual can be loaded or called by the submentioned weblinks or in the download area at our website www.deutschmann.de.
 
 
Depending on the device used the update needs to be carried out via the RS-232 or the Ethernet interface.
 
{| class="wikitable"
 
!
 
! colspan="2"| Interface
 
|-
 
!Device
 
!RS-232
 
!Ethernet
 
|-
 
|PROFIBUS
 
|align="center"|•
 
|
 
|-
 
|PROFINET
 
|
 
|align="center"|•
 
|-
 
|DeviceNet
 
|align="center"|•
 
|
 
|-
 
|EtherNet/IP
 
|
 
|align="center"|•
 
|-
 
|CANopen
 
|align="center"|•
 
|
 
|-
 
|EtherCAT
 
|align="center"|•
 
|
 
|-
 
|Ethernet TCP/IP
 
|align="center"|•
 
|
 
|-
 
|ModbusRTU
 
|align="center"|•
 
|
 
|-
 
|ModbusTCP
 
|align="center"|•
 
|
 
|-
 
|RS (232/485/422)
 
|align="center"|•
 
|
 
|-
 
|BACnet/IP
 
|
 
|align="center"|•
 
|}
 
 
 
== Update via RS-232 ==
 
Please follow the steps below to download the firmware:
 
# Connect the UNIGATE's application interface (RS-232) with your PC.
 
# Start the Firmware Download Tool and select the serial interface (Options→Settings) connected to the UNIGATE.
 
# Put the UNIGATE into configuration mode.
 
#* UNIGATE CL: Set the device's rotary switches S4 and S5 to "F" and power cycle the device.  
 
#* UNIGATE IC/FC: On the developer board please set the mode switch to "Config" and power cycle the device.
 
# A start-up message will appear in the Firmware Download Tool.
 
# Select 'Firmware Download' and confirm the warning.
 
# Select the firmware file (file type HEX), select 'Open', then 'OK'.
 
# Select a Baud rate.
 
# Transmission of the firmware should start now.
 
 
 
In the case of a connection loss during the update process please use the button 'Resume Download' instead of 'Firmware Download' for further attempts.
 
 
 
== Update via Ethernet ==
 
Please follow the steps below to download the firmware:
 
# Connect your UNIGATE with your PC using either a switch or a hub.
 
# Run the Firmware Download Tool, press ‘Firmware Download’ and ‘OK’.
 
# Select the firmware file (type BIN-File) press 'open' and 'OK'.
 
# Enter the IP-Address of the device.
 
#
 
#* UNIGATE CL: On the device please set the rotary switches S4 and S5 to „F“ (config mode).  
 
#* UNIGATE IC/FC: On the developer board please set the mode switch to „Config“.
 
# Press 'Start Download' and restart the device within 20 seconds.
 
# Transmission of the firmware should start now.
 
 
 
 
== Weblinks ==
 
== Weblinks ==
*[http://www.deutschmann.de/en/support/ Support area on the Deutschmann website]
+
*[http://www.deutschmann.de/en/support/ support area on Deutschmann website]
*[http://www.deutschmann.de/produkte/download.php?file_id=488 Firmware Download Tool]
+
*[https://www.deutschmann.de/downloads/Software/Tools/FirmwareDownloadTool/SetupFDT.zip Firmware Download Tool]
*[http://www.deutschmann.de/en/support/?kat=6&pkat=3 Device firmware]
+
*[https://www.deutschmann.de/downloads/Marketing/Anleitung-Instructions/Handbuecher-Manuals/Softwaretools/Englisch/Firmware-Download-Tool/FirmwareDownloadTool_FDT_e.pdf manual]
 +
*[http://www.deutschmann.de/en/support/?kat=6&pkat=3 firmware]

Version vom 5. Dezember 2017, 11:41 Uhr

Firmware Download Tool (FDT)

The Firmware Download Tool (FDT) software lets you load or update the firmware of a Deutschmann UNIGATE® device. Please pay attention that you have to use the latest version of Firmware Download Tool (FDT). The download of a firmware is described in detail in this Manual. The actual Firmware for the used UNIGATE® can be requested by a form on our website. The Firmware Download Tool (FDT) and the manual can be loaded or called by the submentioned weblinks or in the download area at our website www.deutschmann.de.

Weblinks