Änderungen

In order to load a firmware into your UNIGATE device please use the software [[#WeblinksDatei:FDT.JPG|thumb|Firmware Download Tool(FDT)]]. You can find it in our web site's [[#Weblinks|support area]]. Depending on the device used the update needs to be carried out via the RS-232 or the Ethernet interface.{| class="wikitable"!! colspan="2"| Interface|-!Device!RS-232!Ethernet|-|PROFIBUS |align="center"|•||-|PROFINET ||align="center"|•|-|DeviceNet |align="center"|•||-|EtherNet/IP ||align="center"|•|-|CANopen |align="center"|•||-|EtherCAT |align="center"|•||-|Ethernet TCP/IP |align="center"|•||-|ModbusRTU |align="center"|•||-|ModbusTCP |align="center"|•||-|RS (232/485/422)|align="center"|•||-|BACnet/IP||align="center"|•|} == Update via RS-232 ==Please follow the steps below to download the firmware:# Connect the UNIGATE's application interface (RS-232) with your PC.# Start the The Firmware Download Tool and select the serial interface (Options→SettingsFDT) connected to the UNIGATE.# Put the UNIGATE into configuration mode.#* UNIGATE CL: Set the device's rotary switches S4 and S5 to "F" and power cycle software lets you load or update the firmware of a Deutschmann UNIGATE® device. #* UNIGATE IC/FC: On the developer board please set the mode switch Please pay attention that you have to "Config" and power cycle use the device.latest version of ''[[# A start-up message will appear in the Weblinks|Firmware Download Tool. # Select ]]'Firmware Download' and confirm the warning(FDT).# Select the The download of a firmware file (file type HEX), select is described in detail in this 'Open', then [[#Weblinks|Manual]]'OK'.# Select a Baud rate. # Transmission of the firmware should start now. In the case of a connection loss during the update process please use the button The actual 'Resume Download' instead of [[#Weblinks|Firmware]]'Firmware Download' for further attempts. == Update via Ethernet ==Please follow the steps below to download the firmware:# Connect your UNIGATE with your PC using either used UNIGATE® can be requested by a switch or a hubform on our website.# Run the The Firmware Download Tool, press ‘Firmware Download’ and ‘OK’.# Select the firmware file (type BIN-FileFDT) press 'open' and 'OK'.# Enter the IP-Address of manual can be loaded or called by the device.# #* UNIGATE CL: On submentioned weblinks or in the device please set the rotary switches S4 and S5 to „F“ (config mode)download area at our website www. #* UNIGATE IC/FC: On the developer board please set the mode switch to „Config“.# Press 'Start Download' and restart the device within 20 secondsdeutschmann.# Transmission of the firmware should start nowde. 

*[http://www.deutschmann.de/en/support/ Support support area on the Deutschmann website]*[httphttps://www.deutschmann.de/produktedownloads/Software/Tools/FirmwareDownloadTool/downloadSetupFDT.php?file_id=488 zip Firmware Download Tool]*[https://www.deutschmann.de/downloads/Marketing/Anleitung-Instructions/Handbuecher-Manuals/Softwaretools/Englisch/Firmware -Download -Tool/FirmwareDownloadTool_FDT_e.pdf manual]*[http://www.deutschmann.de/en/support/?kat=6&pkat=3 Device firmware]