Firmware update: Unterschied zwischen den Versionen

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen
Zeile 1: Zeile 1:
 
[[Datei:FDT.JPG|thumb|Firmware Download Tool (FDT)]]
 
[[Datei:FDT.JPG|thumb|Firmware Download Tool (FDT)]]
In order to load a firmware into your UNIGATE device please use the software [[#Weblinks|Firmware Download Tool]].  
+
Mit der Software Firmware Download Tool (FDT) kann eine Firmware in ein Deutschmann UNIGATE® geladen bzw. diese aktualisiert werden. Es ist darauf zu achten, dass immer mit der aktuellen Version des ''[[#Weblinks|Firmware Download Tool]]'' (FDT) gearbeitet wird. Im ''[[#Weblinks|Bedienerhandbuch]]'' wird der Download einer Firmware genau beschrieben. Die aktuellste ''[[#Weblinks|Firmware]]'' für das verwendete UNIGATE® kann über ein Formular auf unserer Web-Seite angefordert werden. Das Firmware Download Tool (FDT) und das Bedienerhandbuch können jeweils über die Weblinks oder von unserer Web-Seite www.deutschmann.de im Downloadbereich geladen bzw. aufgerufen werden.
You can find it in our web site's [[#Weblinks|support area]].
 
 
 
Depending on the device type the update needs to be carried out via the RS-232 or the Ethernet interface.
 
{| class="wikitable"
 
!
 
! colspan="2"| Interface
 
|-
 
!Device
 
!RS-232
 
!Ethernet
 
|-
 
|PROFIBUS
 
|align="center"|•
 
|
 
|-
 
|PROFINET
 
|
 
|align="center"|•
 
|-
 
|DeviceNet
 
|align="center"|•
 
|
 
|-
 
|EtherNet/IP
 
|
 
|align="center"|•
 
|-
 
|CANopen
 
|align="center"|•
 
|
 
|-
 
|EtherCAT
 
|align="center"|•
 
|
 
|-
 
|Ethernet TCP/IP
 
|align="center"|•
 
|
 
|-
 
|ModbusRTU
 
|align="center"|•
 
|
 
|-
 
|ModbusTCP
 
|align="center"|•
 
|
 
|-
 
|RS (232/485/422)
 
|align="center"|•
 
|
 
|-
 
|BACnet/IP
 
|
 
|align="center"|•
 
|}
 
 
 
== Update via RS-232 ==
 
Please follow the steps below to download the firmware:
 
# Connect the UNIGATE's application interface (RS-232) with your PC.
 
# Start the Firmware Download Tool and select the serial interface (Options→Settings) connected to the UNIGATE.
 
# Put the UNIGATE into configuration mode.
 
#* UNIGATE CL: Set the device's rotary switches S4 and S5 to "F" and power cycle the device.
 
#* UNIGATE IC/FC: On the developer board please set the mode switch to "Config" and power cycle the device.
 
# A start-up message will appear in the Firmware Download Tool.
 
# Select 'Firmware Download' and confirm the warning.
 
# Select the firmware file (file type HEX), select 'Open', then 'OK'.
 
# Select a Baud rate.
 
# Transmission of the firmware should start now.
 
 
 
In the case of a connection loss during the update process please use the button 'Resume Download' instead of 'Firmware Download' for further attempts.
 
 
 
== Update via Ethernet ==
 
Please follow the steps below to download the firmware:
 
# Connect your UNIGATE with your PC using either a switch or a hub.
 
# Run the Firmware Download Tool, press ‘Firmware Download’ and ‘OK’.
 
# Select the firmware file (type BIN-File) press 'open' and 'OK'.
 
# Enter the IP-Address of the device.
 
# Prepare the UNIGATE to restart in configuration mode.
 
#* UNIGATE CL: On the device please set the rotary switches S4 and S5 to „F“.
 
#* UNIGATE IC/FC: On the developer board please set the mode switch to „Config“.
 
# Press 'Start Download' and restart the device within 20 seconds.
 
# Transmission of the firmware should start now.
 
 
 
 
== Weblinks ==
 
== Weblinks ==
*[http://www.deutschmann.de/en/support/ Support area on the Deutschmann website]
+
*[http://www.deutschmann.de/de/support/ Support Bereich der Deutschmann Web-Seite]
 
*[http://www.deutschmann.de/produkte/download.php?file_id=488 Firmware Download Tool]
 
*[http://www.deutschmann.de/produkte/download.php?file_id=488 Firmware Download Tool]
*[http://www.deutschmann.de/en/support/?kat=6&pkat=3 Device firmware]
+
*[http://deutschmann.de/produkte/download.php?file_id=801 Bedienerhandbuch]
 +
*[http://www.deutschmann.de/de/support/?kat=6&pkat=3 Firmware - Formular]

Version vom 30. August 2016, 14:41 Uhr

Firmware Download Tool (FDT)

Mit der Software Firmware Download Tool (FDT) kann eine Firmware in ein Deutschmann UNIGATE® geladen bzw. diese aktualisiert werden. Es ist darauf zu achten, dass immer mit der aktuellen Version des Firmware Download Tool (FDT) gearbeitet wird. Im Bedienerhandbuch wird der Download einer Firmware genau beschrieben. Die aktuellste Firmware für das verwendete UNIGATE® kann über ein Formular auf unserer Web-Seite angefordert werden. Das Firmware Download Tool (FDT) und das Bedienerhandbuch können jeweils über die Weblinks oder von unserer Web-Seite www.deutschmann.de im Downloadbereich geladen bzw. aufgerufen werden.

Weblinks