Protocol Developer
Protocol Developer is a programming software for Deutschmann UNIGATE®-devices.
Inhaltsverzeichnis
Debug-Function
With Protocol Developer there is the possibilty to debug the programmed resp. created script. Therefore UNIGATE® has to be started in Data Exchange Mode and has to be connected via Debug-Interface or Application Interface (RS232) with the PC resp. Protocol Developer. Further detailed information is to be found under the link UNIGATE® interfaces.
Add language definition (XML-Datei)
The language range of the Deutschmann Script language is continually expanded. Für die Geräte-Firmware und den Protocol Developer gibt die Script-Revision [...] (Zahl in eckiger Klammer hinter der Versionsangabe) an, welchen Stand sie jeweils unterstützen. Die Sprachdefinition ist in XML-Dateien organisiert. Neue Sprachdefinitionen können wie folgt im Protocol Developer installiert werden.
- XML-Datei (z. B. ScriptRev*.xml) im Programmordner ablegen.
- Über den Menüpunkt "Options" --> "Settings" öffnet sich das Fenster "Settings".
- Dort muss der Menüpunkt "ConfigFiles" angewählt werden.
- Im darauffolgenden Fenster kann über die Schaltfläche "add" die gewünschte Konfigurations-Datei ausgewählt bzw. geladen und über die Schaltfläche "OK" bestätigt werden.
- Das nachfolgende Fenster (Restart required) muss über die Schaltfläche "OK" bestätigt und der Protocol Developer neu gestartet werden.
Adapt existing script to another Fieldbus or Industrial Ethernet system
Possible procedure:
- The existing script must be compared with the corresponding script template (template) of the Protocol Developer regarding the bus-specific parameters. These are marked in the script templates (Template) with „!!!“.
- Via menu item „File“ -> „New“ -> „Source“ -> „Template“ can be called the corresponding script template.
- If the bus-specific parameters are identical, the script must not be adapted. However this applies only if at the initalization of the bus (:InitFieldbus;) further bus-specific, optional parameters have not been inserted. If this is the case, these optional parameters have to be compared with the appropriate script template (Example) from the Protocol Developer.
- Via menu item „File“ -> „New“ -> „Source“ -> „Example“ -> „Include“ the appropriate script template can be called.
Weblinks
- Protocol Developer (Zip-Datei)