2.226
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
ROTARNOCK 100 (English) (Quelltext anzeigen)
Version vom 28. Juli 2021, 15:27 Uhr
, 15:27, 28. Jul. 2021→ROTARNOCK 100-PB (PROFIBUS)
* '''Communication Profile Modus''': For Operation via [[#Weblinks|Communication profile for Deutschmann Cam Controls]].<br />
The PROFIBUS-Address (Slave-ID) is set by default to '''126''' (decimal). The [[#Weblinks|'''GSD-file''' (R100.GSD)]] and a [[#Weblinks|'''S7-example project''']] are available for download on our homepage. Further Information regarding ROTARNOCK 100-PB may be found in the manuals [[#Weblinks|"Cam Controls with Fieldbus-Connection"]] und [[#Weblinks|"ROTARNOCK 100 with fieldbus-connection"]].
*'''As replacement for ROTARNOCK 4-PB''': ROTARNOCK 100-PB has the Ident No.: '''3606h'''. If ROTARNOCK 100-PB should be used as replacement for '''ROTARNOCK 4-PB''', the Ident-No. can be changed in WINLOC 32 with the key combination '''"Strg + N"''' into the Ident No.: '''3231h'''. So there have to be done no changes in an existing project. '''Attention:''' If the [[logic function]] is used in the ROTARNOCK 4-PB, the 16 inputs (if used) must be 'swapped' from byte , which are in bytes 9 and 10 to byte 9 in the 5th word are in the PROFIBUS, must be 'swapped'. <br />
*'''As replacement for ROTARNOCK 1-PB; 2-PB and 80-PB''': If ROTARNOCK 100-PB should be used as a replacement for '''ROTARNOCK 1-PB'''; '''ROTARNOCK 2-PB''' or '''ROTARNOCK 80-PB''', the existing project has to be changed. All neccessary information maybe found under: [[Device replacement ROTARNOCK 1-PB and ROTARNOCK 2-PB (English)|Device replacement ROTARNOCK - PROFIBUS]].
