868
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
ROTARNOCK 100 (English) (Quelltext anzeigen)
Version vom 14. Dezember 2017, 17:58 Uhr
, 17:58, 14. Dez. 2017keine Bearbeitungszusammenfassung
The PROFIBUS-Address (Slave-ID) is set by default to '''126''' (decimal). The [[#Weblinks|'''GSD-file''' (R100.GSD)]] and a [[#Weblinks|'''S7-example project''']] are available for download on our homepage. Further Information regarding ROTARNOCK 100-PB may be found in the manuals [[#Weblinks|"Cam Controls with Fieldbus-Connection"]] und [[#Weblinks|"ROTARNOCK 100 with fieldbus-connection"]].
*'''As replacement for ROTARNOCK 4-PB''': ROTARNOCK 100-PB has the Ident No.: '''3606h'''. If ROTARNOCK 100-PB should be used as replacement for '''ROTARNOCK 4-PB''', the Ident-No. can be changed in WINLOC 32 with the key combination '''"Strg + N"''' into the Ident No.: '''3231h'''. So there have to be done no changes in an existing project. '''Note:''' If the logic function is used for ROTARNOCK 4-PB, then this logic function has to be activated for ROTARNOCK 100-PB. Therefore is needed a chargeable release code. '''Attention:'''This release code is tied the serial-no. and can not be used for any other cam control. <br />
*'''As replacement for ROTARNOCK 1-PB and 2-PB''': If ROTARNOCK 100-PB should be used as a replacement for '''ROTARNOCK 1-PB''' or as a replacement for '''ROTARNOCK 2-PB''' , the existing project has to be changed. All neccessary information maybe found under: [[Geräteaustausch Device_replacement_ROTARNOCK_1-PB and ROTARNOCK 12-PB_(English)|Device_replacement_ROTARNOCK_1-PB und and ROTARNOCK 2-PB]].
=== ROTARNOCK 100-PN (PROFINET) ===
