ROTARNOCK 80 (English): Unterschied zwischen den Versionen

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen
 
Zeile 3: Zeile 3:
 
ROTARNOCK 80 can be programmed by [[TERM 6 (English)|TERM 6]] or [[TERM 24 (English)|TERM 24]] or the software [[WINLOC 32 (English)|WINLOC 32]].In the PROFIBUS-Version the programming is done via PROFIBUS.
 
ROTARNOCK 80 can be programmed by [[TERM 6 (English)|TERM 6]] or [[TERM 24 (English)|TERM 24]] or the software [[WINLOC 32 (English)|WINLOC 32]].In the PROFIBUS-Version the programming is done via PROFIBUS.
 
== Device replacement ==
 
== Device replacement ==
The ROTARNOCK 80 was available until '''11.11.2014'''. Depending on the version used, the ROTARNOCK 80 can be replaced by a corresponding ROTARNOCK 100. You find all needed information on the site  
+
*The ROTARNOCK 80 was available until '''11.11.2014'''. Depending on the version used, the ROTARNOCK 80 can be replaced by a corresponding ROTARNOCK 100. You find all needed information on the site  
 
[[Device_replacement_ROTARNOCK_80_(English)|Device replacement ROTARNOCK 80]].
 
[[Device_replacement_ROTARNOCK_80_(English)|Device replacement ROTARNOCK 80]].
 +
*The ROTARNOCK 80 with PROFIBUS interface was available until '''11.11.2014'''. The ROTARNOCK 80 with PROFIBUS interface can be replaced with a ROTARNOCK 100 with PROFIBUS interface. You find all needed information on the site [[Device replacement ROTARNOCK 1-PB and ROTARNOCK 2-PB (English)|Device replacement ROTARNOCK - PROFIBUS]]
  
 
== Weblinks ==
 
== Weblinks ==
 
[https://www.deutschmann.de/downloads/Marketing/Anleitung-Instructions/Handbuecher-Manuals/Nockenschaltwerke%20-%20Cam%20Controls/ROTARNOCK%2080/English/ROTARNOCK_80-e.pdf Manual for ROTARNOCK 80] (PDF-file)
 
[https://www.deutschmann.de/downloads/Marketing/Anleitung-Instructions/Handbuecher-Manuals/Nockenschaltwerke%20-%20Cam%20Controls/ROTARNOCK%2080/English/ROTARNOCK_80-e.pdf Manual for ROTARNOCK 80] (PDF-file)

Aktuelle Version vom 1. Dezember 2020, 13:05 Uhr

ROTARNOCK 80

Programming

ROTARNOCK 80 can be programmed by TERM 6 or TERM 24 or the software WINLOC 32.In the PROFIBUS-Version the programming is done via PROFIBUS.

Device replacement

  • The ROTARNOCK 80 was available until 11.11.2014. Depending on the version used, the ROTARNOCK 80 can be replaced by a corresponding ROTARNOCK 100. You find all needed information on the site

Device replacement ROTARNOCK 80.

  • The ROTARNOCK 80 with PROFIBUS interface was available until 11.11.2014. The ROTARNOCK 80 with PROFIBUS interface can be replaced with a ROTARNOCK 100 with PROFIBUS interface. You find all needed information on the site Device replacement ROTARNOCK - PROFIBUS

Weblinks

Manual for ROTARNOCK 80 (PDF-file)