ScriptProgramTool (English)
Version vom 28. Januar 2015, 11:36 Uhr von Reith (Diskussion | Beiträge) (→Script loading via debug-interface)
By using ScriptProgramTool (SPT) the compiled script (*.dcs) can be loaded into UNIGATE® via application interface (RS232) or via debug-interface.
Script loading via application Interface (RS232)
- Install SPT and then start.
- Via the menue item "Settings" select the used COM-Port. If there exists no real COM-Port at the PC, an USB-to-RS232 converter is needed.
- The required script (*.dcs) can by choosen via the menue item "File".
- Please confirm the button "Download Script".
- Now will appear a dialog window, UNIGATE® must be restarted in "Configuration Mode".
- In the status bar of SPT will appear the message "ApplicationPort connected".
- Now please confirm the dialog window with "OK".
- After that, the script download is starting.
- Done.
Note: If the same script should be loaded on several devices in a row, then from the second device on, after Step 9, you can continue directly with Step 4.
Script loading via debug-interface
From version V1.52 script loading is also supported via debug-interface.
- Install SPT and then start.
- Via the menue item "Settings" select the used COM-Port. If there exists no real COM-Port at the PC, an USB-to-RS232 converter is needed.
- The required script (*.dcs) can by choosen via the menue item "File".
- Please confirm the button "Download Script".
- Now will appear a dialog window, UNIGATE® must be restarted in "Data Exchange Mode".
- In the status bar of SPT will appear the message "DebugPort connected".
- Now please confirm the dialog window with "OK".
- After that, the script download is starting.
- Done.
Note: If the same script should be loaded on several devices in a row, then from the second device on, after Step 9, you can continue directly with Step 4.
Weblinks
Script-Programming-Tool (Zip-Datei)