TERM 32 (English)

Aus Deutschmann Wiki
(Weitergeleitet von TERM 32/en)
Zur Navigation springen Zur Suche springen
TERM 32

Device replacement

There is no direct replacement for TERM 32. Repair is no longer possible. As an alternative you can use the operating units TERM 6 or TERM 24 or the configuration and programming software WINLOC 32. In order to ensure a proper and fast replacement, we need the following information and components:

  1. We have to know the serial-no. of the used cam control in order to check the compatibilty to a new TERM 6 or new TERM 24.
  2. If the used cam control is not compatible to the new and actual TERM 6 or the new and actual TERM 24, then this cam control has to be replaced, too.
  3. For read-out of the used cam control and its programming or, if needed for the configuration and programming of a new cam control with WINLOC32-Basic-or-comfort Version, a corresponding programming cable is needed.
  4. For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC is in need of a real COM-Port. If there is no real COM-Port at the PC, then a USB-to-RS232 converter has to be used.

For a corresponding offer please let us know the serial no. of the used cam control.

Weblinks

Manual for TERM 32 (PDF-file)