TERM 32 (English)
There is no direct replacement for TERM 32. Repair is no longer possible. As an alternative you can use the operating units TERM 6 or TERM 24 or the configuration and programming software WINLOC 32. In order to ensure a proper and fast replacement, we need the following information and components:
- We have to know the serial-no. of the used cam control in order to check the compatibilty to a new TERM 6 or new TERM 24.
- If the used cam control is not compatible to the new and actual TERM 6 or the new and actual TERM 24, then this cam control has to be replaced, too.
- For read-out of the used cam control and its programming or, if needed for the configuration and programming of a new cam control with WINLOC32-Basic-or-comfort Version, a corresponding programming cable is needed.
- For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC is in need of a real COM-Port. If there is no real COM-Port at the PC, then a USB-to-RS232 converter has to be used.
For a corresponding offer please let us know the serial no. of the used cam control.
Manual for TERM 32 (PDF-file)