868
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
UNIGATE® Scan (English) (Quelltext anzeigen)
Version vom 13. Januar 2017, 12:17 Uhr
, 12:17, 13. Jan. 2017keine Bearbeitungszusammenfassung
#Via the button '''"Blink"''' the flash functiom is executed. The '''Bus State LED''' flashes red for about 5 seconds. This is for checking if the marked UNIGATE® Fast-Ethernet device is really the correct one.
#Is the correct UNIGATE® Fast-Ethernet device marked, now an IP-address under '''"IP-Address"''' maybe added and then assigned. This address can be assigned temporarily or permanently. If the IP-address has to be stored permanently in the UNIGATE® Fast-Ethernet device, then first in the box '''"set_perm"''' has to be set a hook. Otherwise, it is set only temporary.
#Via the button '''Das gewünschte UNIGATE® Fast-Ethernet Gerät muss erneut markiert werden. Über den dem Button "Set IP"''' the wird dann die IP-address is transferred and set accordinglyAdresse übertragen und entsprechend gesetzt.
#Finally the UNIGATE® Fast-Ethernet device should restart and a new scan should be operated in order to check if the previously transmitted IP-address has been set correctly. ''Note'': If the IP-address is set only temporary, there should be done no restart, the new scan should be operated directly after setting of the new IP-address.
#Done.
