Updating to a firmware with extended configuration storage

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen

In addition to the regular start-up message the following warning will appear:

NOTE: The configuration storage size has changed. Please refer to the manual and the online documentation for further details.

If the device configuration needs to be altered using Wingate, please pay attention to the following steps:

  1. The script actually loaded on the device has to be available.
  2. Before changing any parameters of the device configuration please save the actual configuration.
  3. Then please carry out two times Reset Device. This will also delete the installed script so it has to be reloaded into the device.
  4. Now you can load again the previously saved configuration and alter it.