Versionen
28. April 2021
Der Seiteninhalt wurde durch einen anderen Text ersetzt: „* UNIGATE * UNIGATE CL * en:Frequently aske…“
-6.489
keine Bearbeitungszusammenfassung
-11.301
keine Bearbeitungszusammenfassung
-5.839
keine Bearbeitungszusammenfassung
+568
Pfeiffer verschob die Seite Frequently asked questions nach en:Frequently asked questions Fieldbus- and Industrial-Ethernet-Devices
K
21. April 2021
31. März 2021
3. Februar 2020
27. August 2019
→How to replace ROTARNOCK 1/2/3/4 by ROTARNOCK 100?
-4
→How to replace a ROTARNOCK 1/2/3/4 by a ROTARNOCK 100?
-4
→How to change the Profibus Ident Number?
+1
→What has to be considered when using a LOCON 200 in connection with TERM 24?
-4
→How to reset a LOCON 90, LOCON 100, LOCON 100-PB, LOCON 200, LOCON 200-PB, ROTARNOCK 100 or ROTARNOCK 100-PB back to delivery condition (reset)?
-2
→Are there replacements for a product that is no longer available? (LOCON 32-HC, LOCON 32-PM)...
+2
→Are there replacements for a product that is no longer available? (LOCON 32-HC, LOCON 32-PM)...
-8
→Are there replacements for a product that is no longer available? (LOCON 32-HC, LOCON 32-PM)...
-4
24. Oktober 2016
20. September 2016
→What is to consider when switching to UNIGATE CL from UNIGATE SC?
+45
→How to change the Profibus Ident Number?
+53
11. Mai 2016
→How to reset a LOCON 90, LOCON 100, LOCON 100-PB, LOCON 200, LOCON 200-PB, ROTARNOCK 100 or ROTARNOCK 100-PB back to delivery condition (reset)?
+1
→How to configure the UNIGATE CL with WINGATE?
9. September 2014
→How do I configure the UNIGATE CL with WINGATE?
-2
→Can I rename the GSDML file?
+1
→How can I evaluate a UNIGATE device with a PROFINET interface?
-3
→How can I connect Deutschmann PROFINET devices to a S7?
-3
→How do I realize the conversion from Fieldbus ↔ Modbus RTU (Master)?
-2
→How do I set the Slave ID via the Master?
-2
→How can I use the UNIGATE IC PROFIBUS DPV1 5V without driver 485 and how much current can the DC/DC converter provide on the fieldbus side?
-3
→How do I switch to EtherNet/IP 2Port?
-2
→How do I replace CANopen (Master) - PROFIBUS DP (Slave)?
-2
→How can I connect two networks (PROFIBUS / PROFINET)?
-3
→What do I have to consider when I switch to UNIGATE CL from UNIGATE SC?
-6
→How do I set the UNIGATE into the configuration mode (Configmode)?
-2
→How do I get my script into the device?
-2
→How do I connect an UNIGATE with the RS232-interface (COM port) at the PC?
-2
→I encountered problems with the RS232 connection between UNIGATE and PC. What can I do when WINGATE says "no Gateway found"?
-3
→How do I carry out a Firmware update at UNIGATE?
-2
→How and where do I enter the WINLOC 32 comfort version license key?
+1
→How do I replace a ROTARNOCK 1/2/3/4 by a ROTARNOCK 100?
-2
→How do you change the Profibus Ident Number?
-4
→How do I activate the logic function of LOCON 90, LOCON 100, LOCON 100-PB, LOCON 200, LOCON 200-PB, ROTARNOCK 100 or ROTARNOCK 100-PB?
-2
→How do I reset a LOCON 90, LOCON 100, LOCON 100-PB, LOCON 200, LOCON 200-PB, ROTARNOCK 100 or ROTARNOCK 100-PB back to delivery condition (reset)?
-2
→How do I connect a LOCON with the RS232-interface (COM port) at the PC?
-2
8. September 2014
→TN65 - ROTARNOCK - what is it?
-1
→How do you change the Profibus Ident Number?
+1
→How and where do I enter the WINLOC 32 comfort version license key?
+1
→How do I set the UNIGATE into the configuration mode (Configmode)?
-164
→How do I carry out a Firmware-update at UNIGATE?
