2.226
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
en:Frequently asked questions Fieldbus- and Industrial-Ethernet-Devices (Quelltext anzeigen)
Version vom 24. Oktober 2016, 09:11 Uhr
, 09:11, 24. Okt. 2016→How to activate the logic function of LOCON 90, LOCON 100, LOCON 100-PB, LOCON 200, LOCON 200-PB, ROTARNOCK 100 or ROTARNOCK 100-PB?
Note: After a reset the optional LOGIC-function has to be activated again. At the devices LOCON 100 & LOCON 200 the interface (RS232 or DICNET) can be set by means of a configuration file. If relating to software "DICNET" was previously configured then the interface is put back to RS232.
===How to activate the logic function of LOCON 90, LOCON 100, LOCON 100-PB, LOCON 200, LOCON 200-PB, ROTARNOCK 100 or ROTARNOCK 100-PB?===A "release code" ("key") is required to be able to release the optional logic functions. You can purchase this code either from us directly or from your reseller. The serial number of the unit, that is supposed to be extended by this function has to be mentioned on the purchase order. For LOCON 100, LOCON 100-PB, LOCON 200 or LOCON 200-PB only the serial number of the basic device has to be stated. The logic function will automatically be activated for all extensions. You will receive the release code by e-mail.
The device to be extended by the logic function must be connected to the PC and a start-up string has to be shown WINLOC 32.
Note: After a "Clear all" the logic function has to be released again.
In the category Manuals in the download area you can find directions with screen shots by the name "Instructions for the release of the logic function of LOCON 100(-PB) / ; LOCON 200(-PB) & ROTARNOCK 100(-PB)".
===External Wiring===
