en:Protocol Developer: Unterschied zwischen den Versionen

Aus Deutschmann Wiki
Zur Navigation springen Zur Suche springen
Zeile 19: Zeile 19:
 
  File:PROTOCOL_DEVELOPER_-_XML-4.png|5.
 
  File:PROTOCOL_DEVELOPER_-_XML-4.png|5.
 
</gallery>
 
</gallery>
== Adapt existing script to another fieldbus or Industrial Ethernet system==
+
== Adapt existing script to another Fieldbus or Industrial Ethernet system==
 
Possible procedure:
 
Possible procedure:
 
# The existing script must be compared with the corresponding script template ('''template''') of the Protocol Developer regarding the bus-specific parameters. These are marked in the script templates ('''Template''') with „'''!!!'''“.  
 
# The existing script must be compared with the corresponding script template ('''template''') of the Protocol Developer regarding the bus-specific parameters. These are marked in the script templates ('''Template''') with „'''!!!'''“.  

Version vom 16. Februar 2017, 11:20 Uhr

Protocol Developer is a programming software for Deutschmann UNIGATE®-devices.

Debug-Function

With Protocol Developer there is the possibilty to debug the programmed resp. created script. Therefore UNIGATE® has to be started in Data Exchange Mode and has to be connected via Debug-Interface or Application Interface (RS232) with the PC resp. Protocol Developer. Further detailed information is to be found under the link UNIGATE® interfaces.

Sprachdefinition hinzufügen (XML-Datei)

Der Sprachumfang der Deutschmann Script-Sprache wird kontinuierlich erweitert. Für die Geräte-Firmware und den Protocol Developer gibt die Script-Revision [...] (Zahl in eckiger Klammer hinter der Versionsangabe) an, welchen Stand sie jeweils unterstützen. Die Sprachdefinition ist in XML-Dateien organisiert. Neue Sprachdefinitionen können wie folgt im Protocol Developer installiert werden.

  1. XML-Datei (z. B. ScriptRev*.xml) im Programmordner ablegen.
  2. Über den Menüpunkt "Options" --> "Settings" öffnet sich das Fenster "Settings".
  3. Dort muss der Menüpunkt "ConfigFiles" angewählt werden.
  4. Im darauffolgenden Fenster kann über die Schaltfläche "add" die gewünschte Konfigurations-Datei ausgewählt bzw. geladen und über die Schaltfläche "OK" bestätigt werden.
  5. Das nachfolgende Fenster (Restart required) muss über die Schaltfläche "OK" bestätigt und der Protocol Developer neu gestartet werden.

Adapt existing script to another Fieldbus or Industrial Ethernet system

Possible procedure:

  1. The existing script must be compared with the corresponding script template (template) of the Protocol Developer regarding the bus-specific parameters. These are marked in the script templates (Template) with „!!!“.
    • Via menu item „File“ -> „New“ -> „Source“ -> „Template“ can be called the corresponding script template.
  2. If the bus-specific parameters are identical, the script must not be adapted. However this applies only if at the initalization of the bus (:InitFieldbus;) further bus-specific, optional parameters have not been inserted. If this is the case, these optional parameters have to be compared with the appropriate script template (Example) from the Protocol Developer.
    • Via menu item „File“ -> „New“ -> „Source“ -> „Example“ -> „Include“ the appropriate script template can be called.

Weblinks