Protocol Developer
Version vom 28. Juni 2016, 14:24 Uhr von Reith (Diskussion | Beiträge) (→Adapt existing script to another fieldbus or Industrial Ethernet system)
Protocol Developer is a programming software for Deutschmann UNIGATE®-devices.
Debug-Function
With Protocol Developer there is the possibilty to debug the programmed resp. created script. Therefore UNIGATE® has to be started in Data Exchange Mode and has to be connected via Debug-Interface or Application Interface (RS232) with the PC resp. Protocol Developer. Further detailed information is to be found under the link UNIGATE® interfaces.
Adapt existing script to another fieldbus or Industrial Ethernet system
Possible procedure:
- The existing script must be compared with the corresponding script template ( 'template' ) of the Protocol Developer regarding the bus-specific parameters. These are marked in the script templates (Template) with „!!!“.
- Via menu item „File“ -> „New“ -> „Source“ -> „Template“ can be called the corresponding script template.
- If the bus-specific parameters are identical, the script must not be adapted. However this applies only if at the initalization of the bus (:InitFieldbus;) further bus-specific, optional parameters have not been inserted. If this is the case, these optional parameters have to be compared with the appropriate script template ( 'Example' ) from the Protocol Developer.
- Via menu item „File“ -> „New“ -> „Source“ -> „Example“ -> „Include“ the appropriate script template can be called.
Weblinks
- Protocol Developer (Zip-Datei)