en:WINGATE: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Reith (Diskussion | Beiträge) |
Reith (Diskussion | Beiträge) |
||
Zeile 5: | Zeile 5: | ||
#Install WINGATE and start. | #Install WINGATE and start. | ||
#At the first start will open a '''"dialog window"''' showing the note that the acutal selected COM-Port does not exist. Please confirm this Dialog window with '''"OK"'''. | #At the first start will open a '''"dialog window"''' showing the note that the acutal selected COM-Port does not exist. Please confirm this Dialog window with '''"OK"'''. | ||
− | #Via the menue item '''"Options"'''-->'''"Port"''' the corresponding COM-Port | + | #Via the menue item '''"Options"'''-->'''"Port"''' the corresponding COM-Port which is connected to the application-RS232-interface of the UNIGATE has to be selected. This will be shown in the status bar.'''Attention''': If there exists no real COM-Port at the PC, an [[USB-to-RS232 converter]] is needed. |
− | # | + | #Then start the UNIGATE in '''Konfig.-Mode'''. WINGATE will show a startup message of the UNIGATE. |
− | # | + | #Via the menue item '''"File"'''-->'''"Upload"''' the configuration of the UNIGATE can be read. |
− | # | + | #Via the menue items '''"more items visible"''' und '''"more items editable"''' the parameters are displayed which maybe changed. |
− | # | + | #Via the menue item '''"File"'''-->'''"Download"''' the changed configuration now can be loaded into the UNIGATE. |
− | # | + | #Via the menue item '''"File"'''-->'''"Save as"''' the configuration of the UNIGATE can be saved and filed. |
− | # | + | #Done. |
== Gerätekonfiguration über die Debug-Schnittstelle == | == Gerätekonfiguration über die Debug-Schnittstelle == |
Version vom 21. Januar 2015, 15:08 Uhr
With our configuration software WINGATE an UNIGATE can be configured and a compiled script (*.dcs)can be loaded.
Inhaltsverzeichnis
Device configuration via application-RS232-interface
Please follow the procedure decribed below for configuration of the device via application-RS232-interface:
- Install WINGATE and start.
- At the first start will open a "dialog window" showing the note that the acutal selected COM-Port does not exist. Please confirm this Dialog window with "OK".
- Via the menue item "Options"-->"Port" the corresponding COM-Port which is connected to the application-RS232-interface of the UNIGATE has to be selected. This will be shown in the status bar.Attention: If there exists no real COM-Port at the PC, an USB-to-RS232 converter is needed.
- Then start the UNIGATE in Konfig.-Mode. WINGATE will show a startup message of the UNIGATE.
- Via the menue item "File"-->"Upload" the configuration of the UNIGATE can be read.
- Via the menue items "more items visible" und "more items editable" the parameters are displayed which maybe changed.
- Via the menue item "File"-->"Download" the changed configuration now can be loaded into the UNIGATE.
- Via the menue item "File"-->"Save as" the configuration of the UNIGATE can be saved and filed.
- Done.
Gerätekonfiguration über die Debug-Schnittstelle
Nachfolgend wird beschrieben wie die Gerätekonfiguration über die Debug-Schnittstelle durchgeführt wird:
- WINGATE installieren und anschließend starten.
- Beim erstmaligen Starten öffnet sich ein "Dialogfenster" mit dem Hinweis, dass der aktuell eingestellte COM-Port nicht existiert. Dieses Dialogfenster mit "OK" bestätigen.
- Über den Menüpunkt "Options"->"Port" muss der entsprechende COM-Port angewählt werden, der mit der Debug-Schnittstelle des UNIGATEs verbunden ist. Im Anschluss wird diese in der Statusleiste angezeigt. Achtung: Wenn kein echter COM-Port mehr am PC vorhanden ist, wird ein USB-RS232-Konverter benötigt.
- Danach muss das UNIGATE im Debug-Mode gestartet werden. In der Statusleiste erscheint die Meldung "Device started in WINGATE-Mode".
- Über den Menüpunkt "Extras"-->"Upload_Config_Debug" kann nun die Konfiguration des UNIGATEs ausgelesen werden.
- Über die Menüpunkte "more items visible" und "more items editable" werden die Parameter hervorgehoben, die geändert werden können.
- Über den Menüpunkt '"Extras"-->"Download_Config_Debug" kann nun die geänderte Konfiguration in das UNIGATE geladen werden.
- Über den Menüpunkt "File"-->"Save as" kann die Konfiguration für das UNIGATE gespeichert und archiviert werden.
- Fertig.
Script laden über die Applikations-RS232-Schnittstelle
Nachfolgend wird beschrieben wie ein kompiliertes Script (*.dcs) über die Applikations-RS232-Schnittstelle geladen wird:
- WINGATE installieren und anschließend starten.
- Beim erstmaligen Starten öffnet sich ein "Dialogfenster" mit dem Hinweis, dass der aktuell eingestellte COM-Port nicht existiert. Dieses Dialogfenster mit "OK" bestätigen.
- Über den Menüpunkt "Options"->"Port" muss der entsprechende COM-Port angewählt werden, der mit der Applikations-RS232-Schnittstelle des UNIGATEs verbunden ist. Im Anschluss wird diese in der Statusleiste angezeigt. Achtung: Wenn kein echter COM-Port mehr am PC vorhanden ist, wird ein USB-RS232-Konverter benötigt.
- Danach muss das UNIGATE im Konfig.-Mode gestartet werden. In WINGATE erhält man die Einschaltmeldung des UNIGATEs.
- Über den Menüpunkt "File"-->"Write Script" wird nun das benötigte Script (*.dcs) ausgewählt und im Anschluss direkt in das UNIGATE geladen.
- Danach startet das UNIGATE automatisch neu und erzeugt eine neue Einschaltmeldung.
- Fertig.
Weblinks
- Software WINGATE (Zip-Datei)
- Handbuch für WINGATE (PDF-Datei)