en:WINGATE: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Reith (Diskussion | Beiträge) |
Reith (Diskussion | Beiträge) |
||
Zeile 8: | Zeile 8: | ||
#At the first start will open a '''"dialog window"''' showing the note that the acutal selected COM-Port does not exist. Please confirm this dialog window with '''"OK"'''. | #At the first start will open a '''"dialog window"''' showing the note that the acutal selected COM-Port does not exist. Please confirm this dialog window with '''"OK"'''. | ||
#Via the menue item '''"Options"'''→'''"Port"''' select the used COM-Port. If there exists no real COM-Port at the PC, an [[USB-to-RS232 converter]] is needed. | #Via the menue item '''"Options"'''→'''"Port"''' select the used COM-Port. If there exists no real COM-Port at the PC, an [[USB-to-RS232 converter]] is needed. | ||
− | #After that the UNIGATE® has to be connected via[[UNIGATE® interfaces|Application Interface (RS232)]] and to be started in ''' | + | #After that the UNIGATE® has to be connected via [[UNIGATE® interfaces|Application Interface (RS232)]] and to be started in '''Configuration Mode''' (Rotary switches '''S4 + S5''' set to '''"FF"'''). WINGATE will show the startup message of the UNIGATE®. |
− | |||
#Via the menue item '''"File"'''→'''"Upload"''' the configuration of UNIGATE® can be read now. | #Via the menue item '''"File"'''→'''"Upload"''' the configuration of UNIGATE® can be read now. | ||
#Via the menue items '''"more items visible"''' und '''"more items editable"''' more parameters (if available) are shown and maybe changed. | #Via the menue items '''"more items visible"''' und '''"more items editable"''' more parameters (if available) are shown and maybe changed. |
Version vom 3. Mai 2016, 10:58 Uhr
The software WINGATE is a configuration software for Deutschmann UNIGATE®-devices.
Inhaltsverzeichnis
Device Configuration
The device configuration maybe done via Application Interface (RS232) or via Debug-Interface.
Application Interface (RS232)
- Install WINGATE and start.
- At the first start will open a "dialog window" showing the note that the acutal selected COM-Port does not exist. Please confirm this dialog window with "OK".
- Via the menue item "Options"→"Port" select the used COM-Port. If there exists no real COM-Port at the PC, an USB-to-RS232 converter is needed.
- After that the UNIGATE® has to be connected via Application Interface (RS232) and to be started in Configuration Mode (Rotary switches S4 + S5 set to "FF"). WINGATE will show the startup message of the UNIGATE®.
- Via the menue item "File"→"Upload" the configuration of UNIGATE® can be read now.
- Via the menue items "more items visible" und "more items editable" more parameters (if available) are shown and maybe changed.
- Via the menue item "File"→"Download" the changed configuration now can be loaded into the UNIGATE®.
- Via the menue item "File"→"Save as" the configuration of UNIGATE® can be saved and filed.
- Done.
Debug Interface
- Install WINGATE and start.
- At the first start will open a "dialog window" showing the note that the acutal selected COM-Port does not exist. Please confirm this dialog window with "OK".
- Via the menue item "Options"→"Port" select the used COM-Port. If there exists no real COM-Port at the PC, an USB-to-RS232 converter is needed.
- Danach muss das UNIGATE® über die Debug-Schnittstelle angeschlossen und im Datenaustauschmodus (Drehkodierschalter S4 + S5 z.B. auf "00") gestartet werden. In der Statusleiste erscheint die Meldung "Device started in WINGATE-Mode".
- Then start the UNIGATE® in Data Exchange Mode. In the status bar will appear the message "Device started in WINGATE-Mode".
- Via the menue item "Extras"→"Upload_Config_Debug" the configuration of the UNIGATE® can be read.
- Via the menue items "more items visible" und "more items editable" more parameters (if available) are shown and maybe changed.
- Via the menue item '"Extras"→"Download_Config_Debug" the changed configuration now can be loaded into the UNIGATE®.
- Via the menue item "File"→"Save as" the configuration of the UNIGATE® can be saved and filed.
- Done.
Script loading via Application Interface (RS 232)
- Install WINGATE and start.
- At the first start will open a "dialog window" showing the note that the acutal selected COM-Port does not exist. Please confirm this dialog window with "OK".
- Via the menue item "Options"→"Port" select the used COM-Port. If there exists no real COM-Port at the PC, an USB-to-RS232 converter is needed.
- Then start the UNIGATE® in Configuration-Mode. WINGATE will show the startup message of the UNIGATE®.
- Via the menue item "File"→"Write Script" the needed script (*.dcs) can be selected and is loaded thereafter directly into the UNIGATE®.
- After that the UNIGATE® will start automatically new and displays a new startup message.
- Done.
Reset Device
- Install WINGATE and start.
- At the first start will open a "dialog window" showing the note that the acutal selected COM-Port does not exist. Please confirm this dialog window with "OK".
- Via the menue item "Options"→"Port" select the used COM-Port. If there exists no real COM-Port at the PC, an USB-to-RS232 converter is needed.
- Then start the UNIGATE® in Configuration-Mode. WINGATE will show the startup message of the UNIGATE®.
- Via the menue item "Options"→"Reset Device" the reset can be carried out now.
- The then opening dialog window should be confirmed with "Ja" only if the "Reset Device" really should be carried out. The loaded script will be deleted. Note for UNIGATE® CL: From version V2.64 the Universalscript Deutschmann will remain on the device, if this was loaded to it before "Reset Device"is executed.
- Done.
Weblinks
- Software WINGATE (Zip-Datei)
- Handbuch für WINGATE (PDF-Datei)