868
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
→Debug Interface
#Via the menue item '''"Options"'''→'''"Port"''' select the used COM-Port. If there exists no real COM-Port at the PC, an [[USB-to-RS232 converter]] is needed.
#After that the UNIGATE® has to be connected via [[UNIGATE® interfaces|'''Debug Interface''']] and to be started in '''Data Exchange Mode''' (Rotary switches '''S4 + S5''' set to '''"00"''').In the status bar will appear the message '''"Device started in WINGATE-Mode"'''.
#Via the menue item '''"Extras"'''→'''"Upload_Config_Debug"''' the configuration of the UNIGATE® can be read. A '''"dialogue dialog window'''" will show up with the note: '''"Restart UNIGATE in Run-Mode and confirm"'''. Before to be able to confirm this '''"dialogue dialog window"''' with '''"OK"''', UNIGATE® has to be started again. Only when in the status bar the message will appear '''"Device starting in WINGATE-Mode"''' , this '''"Dialogue Dialog Window"''' maybe confirmed with '''"OK"'''. Now the upload will be processed. During this process the message '''"Upload"''' will be shown in the status bar. After a successfull upload will appear the message '''"Upload finished"''' in the Status bar.
#Via the menue items '''"more items visible"''' und '''"more items editable"''' more parameters (if available) are shown and maybe changed.
#Via the menue item ''''"Extras"'''→'''"Download_Config_Debug"''' the changed configuration now can be loaded into the UNIGATE®. A '''"dialogue dialog window'''" will show up with the note: '''"Restart UNIGATE in Run-Mode and confirm"'''. Before to be able to confirm this '''"dialogue dialog window"''' with '''"OK"''', UNIGATE® has to be started again. Only when in the status bar the message will appear '''"Device starting in WINGATE-Mode"''' , this '''"Dialogue Dialog Window"''' maybe confirmed with '''"OK"'''. Now the download will be processed. During this process the message '''"Downloading..."''' will be shown in the status bar. After a successfull upload will appear the message '''"Download finished"''' in the status bar.
#Via the menue item '''"File"'''→'''"Save as"''' the configuration of the UNIGATE® can be saved and filed.
#Done.
