868
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
→Reset Device
#At the first start will open a '''"dialog window"''' showing the note that the acutal selected COM-Port does not exist. Please confirm this dialog window with '''"OK"'''.
#Via the menue item '''"Options"'''→'''"Port"''' select the used COM-Port. If there exists no real COM-Port at the PC, an [[USB-to-RS232 converter]] is needed.
#After that the UNIGATE® has to be connected via [[UNIGATE® interfaces|'''Application Interface (RS232)''']] and to be started in '''Configuration Mode''' (Rotary switches '''S4 + S5''' set to '''"FF"'''). WINGATE will show the startup message of the UNIGATE®.
#Then start the UNIGATE® in '''Configuration-Mode'''. WINGATE will show the startup message of the UNIGATE®.
#Via the menue item '''"Options"'''→'''"Reset Device"''' the reset can be carried out now.
