TERM 24 (English)
Version vom 16. Mai 2014, 14:05 Uhr von Reith (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „thumb|TERM 24 und TERM 24 Ausführung IP65 (optional) == Instruction == The Bedienung …“)
Instruction
The Bedienung of TERM 24 is done via the comfortable control panel.
Device Replacement
Each TERM 24 can be replaced by a corresponding actual TERM 24 or the configuration and programming software WINLOC 32. In order to ensure a proper and fast replacement, we would need the following information and components:
- The serial-no. or the article-no.(Vxxxx) of the old device has to be known in order to offer a corresponding TERM 24.
- We have to know the serial-no. of the used cam control in order to check the compatibilty to the new TERM 24.
- If the used cam control is not compatible to the new and actual TERM 24, then this cam control has to be replaced, too.
- For reading of the used cam control and its programming or, if needed, the configuration and programming of a new cam control with WINLOC32-Basic-or-comfort Version would be needed a corresponding programming cable.
- For the configuration and programming with WINLOC 32-Basic-or-comfort Version, the PC is in need of a real COM-Port. If there exists no more real COM-Port at the PC, then a USB-RS232-Converter has to be used.
For a corresponding offer please let us know the serial-no. or the articel-no. (Vxxxx) of the old device and the serial-no. of the used cam control.
Weblinks
Handbuch für das TERM 24 (PDF-Datei)