319
Bearbeitungen
Änderungen
Zur Navigation springen
Zur Suche springen
Device replacement ROTARNOCK 1, 2, 3 and 4 (English) (Quelltext anzeigen)
Version vom 13. Juli 2015, 11:38 Uhr
, 11:38, 13. Jul. 2015keine Bearbeitungszusammenfassung
Rotarnock 1,2,3 and 4 as well as the corresponding PROFIBUS variants were replaced by [[ROTARNOCK 100 (English)|ROTARNOCK 100]]. This is available with or without PROFIBUS. The following information and components are needed to guarantee a quick exchange and programming of the new device:
# The serial number or the article number (Vxxxx) of the old device have to be known to ensure that an appropriate new device can be offered.
# If a TERM 6 oder a TERM 24 is already in use, we also need to know the serial number of this device to check the compatibility with the new device. '''Note''': TERM 5 is '''not''' compatible to with ROTARNOCK 100!!# To read-out the old device and possibly for the configuration and programming of the new device with the WINLOC32-Basis-or comfort-version, a corresponding programming cable is needed. '''Note''': If this Whether the programming cable maybe can also be used also for a necessary read-out of the old devive, device has to be checked tested in every single each case!!!
# A TERM 6 or the WINLOC32-Basis or comfort-version is needed for the configuration of the new device.
# There has to be a real COM-Port on the PC for the configuration and programming of the new device with WINLOC32. If there is no real COM-Port on the PC, you need a USB-RS232-converter.
