Änderungen

== Device replacement ==Rotarnock 1,2,3 and 4 as well as the corresponding PROFIBUS variants were replaced by [[ROTARNOCK 80 and 100 (English)|ROTARNOCK 100]]. These are This is available with or without PROFIBUS. The following information and components are needed to guarantee a quick exchange and programming of the new device:  '''Adapting the new device'''

# If a TERM 6 oder or a TERM 24 is already in use, we also need to know the serial number of this device to check the compatibility with the new device. '''Note''': TERM 5 is '''not''' compatible with ROTARNOCK.100!# To read-out the old device and possibly for the configuration and programming of the new device with the WINLOC32-Basis-or comfort-version, a corresponding programming [[Programming cable ]] is needed.'''Note''': Whether the programming cable can also be used for a necessary read-out of the old device has to be tested in each case!

   '''=== Programming - zero offset - program selection'''===# The programming of the new device can be performed with a TERM 6, a TERM 24 or with the WINLOC32-Basis or comfort-version. With the PROFIBUS version you can also program via the PROFIBUS.# The zero offset can be performed with a TERM 6, a TERM 24 or with the WINLOC32-comfort-version. With the PROFIBUS version you can also program via the PROFIBUS.# The program selection can be done with a TERM 6, a TERM 24 or via the external program selection. With the PROFIBUS version you can also program via the PROFIBUS.   '''For a corresponding offer please let us know the serial number or the article number (Vxxxx) of the old deviceand, if used, the serial-no. of TERM 6 resp. TERM 24.'''